Moyno Grinders

Moyno Muncher/Grinders

Moyno Muncher is a range of different twin shaft, slow speed, high torque grinders that macerate solids within a flow stream. Each shaft is fitted with a series of interleaving cutters and spacers to give real ‘positive displacement solids grinding. Once solids become trapped in the slowly revolving cutter stacks, the differential speed of the cutter stacks pull apart fibrous material, crop and shear plastic into small pieces and crush friable or brittle material. The Moyno Muncher has been successfully installed for over 25 years into the most difficult and industrial and municipal application

EZstrip™ TR Muncher

CT201 A new addition to the EZstrip™ family of products, the CT201 TR Muncher® has been designed specifically to meet on-site tanker discharge requirements and sludge/fat processing, for maceration of solids within the flow and protection of downstream equipment from blockages.

Installation of the EZstrip™ CT201 TR Muncher® is simple, with in-line flanges or the option of tanker coupling connections. Quick release inspection covers also allow in-situ replacement of the cutters, which can be specified to either 8.0mm, 5.5mm and 3.0mm thickness, to match the optimum particle size for specific process requirements.

Features & Benefits

• Quick release access port allows the cutter assembly to be maintained in-place without removing the equipment and therefore reduces maintenance time.
• Rotational speed produces high torque, resulting in lower operating power at 1.5 or 2.2kW, which are available with energy efficient motors.
• Lower cutter tip speeds dramatically reduce wear rates. Slow speeds also ensure low noise and vibration, and good abrasion resistance.
• Off-loading requirements for ‘on-stand’ tankering are matched by the Munchers capacity.
• Pull-back cutter stack allows removal without disturbing the pipeline.

CT203 & CT205 Designed specifically for the efficient maceration of abrasive sludges, the EZstrip™ CT203/05 TR Munchers are very effective in capturing irregular shaped objects. The layback cutter shafts on this Muncher are set at an angle to the incoming flow. If a rejection cycle is necessary, the object can drop into the built-in trash trap set clear of and below the cutter stacks, preventing damage. The trash trap is fitted with a large diameter access port to enable easy removal, cleaning and flushing.

Features & Benefits

• Moyno ETOS cutters offer positive and effective solids maceration
• Shafts operate at differential speeds to promote a tearing action on the solids
• Pull back cutter stack allows removal without disturbing the pipeline
• Cantilever shaft design eliminates the need for bottom bearings and seals, significantly reducing wearing components
• Patented built-in trash trap with clean-out ports to catch any rejected material
• Low cutter tip speeds, low power and low noise level
• Each Muncher is supplied with a programmable logic controller (PLC) to protect the machine against damage and overloads
• Munchers can be supplied to comply with the ATEX Directive 94/9/EC

Read More.. EZstrip TR Muncher In-line Grinder

SERIES A

The reliable Series A Muncher is well proven in its ability to effectively macerate raw sewage, sludge, screenings, and industrial process flows. Available for pipeline of channel installations, the shaft speed of 85 rpm offers low cutter tip speeds and therefore dramatically reduces wear rates in comparison to high speed macerators.               The Series A Muncher can be packaged with Moyno’s pump to provide a highly effective macerating, screening, or pumping system. Features Power savings, elimination of manual handling and associated transport costs, odor control, and automated operation are all achieved when installing Munchers to replace conventional screening systems to existing or proposed submersible pump stations ETOS cutters offer positive and effective solids grinding Optional high flow side rails allow higher capacities whilst reducing the possibility of solids passing through without being macerated – typically an increase in capacity of 40% Can be installed in an existing concrete channel or in a fabricated frame, complete with guide rails, into existing submersible pump stations as a simple and quick retrofit Each Muncher is supplied with a programmable logic controller (PLC) to protect the machine against damage and overloads Muncher can be supplied to comply with the ATEX Directive 94/9/EC

Typical Applications

• Protection of pumps to eliminate blockages
• Submersible pump protection
• Fine grinding of sewage and sludges
• Disintegration of extracted screenings
• Head of works maceration
• Industrial effluent maceration
• Mud contaminated drill cuttings
• Food products and waste
• Slaughterhouse waste
• Aircraft effluent
• Prison waste water maceration

Read More..Series A In-Channel Grinder

Discam Channel Grinder is a unique grinder and screening system which offers a much more effective and low maintenance alternative to handling screenings than conventional systems.  With the ability to capture up to 95% of solids at 5mm or 9mm apperture sizes, this inovative solution, combines a self cleaning screen with a high torque grinder.  No manual attendance or cleaning is required and disposal costs for handling debris extracted by traditional screening processes are eliminated.  The Discam is constructed using a series of shafts, two of which are fitted with interweaving cutters and spacers to give positive displacement solids grinding, while the remaining shafts are fitted with overlapping and intermeshing discs.  Easily retrofitted into existing sewage pump stations or inlet works, as well as installed in new build facilities, this high performance package is suitable for almost any type of wastewater facility.